FRP/ECTFE TANK(复合储罐)工艺特点：
1.  ECTFE SHEET IS PVDF FIBRE BACK SHEET;
板材采用有纤维背敷的板材
2.  ECTFE SHEET TO PVDF SHEETJOINT AREA USE PVDF ROD TO WELD ( BOTH SIDE );
采用双面焊接的形式
3.  CARBON FIBRE LAMINATED ON WELDING AREA ON PVDF/FRP LINING SURFACE
( FOR SPARKING TEST );
在焊接的表面需要进行碳纤维积层,为了便于进行电火花测试
4.  FRP LAMINATION UNTIL REQUEST THICKNESS;
FRP 积层达到设计要求的厚度;